Contact Us Contact Us
Tel / Fax: +86-731-22588826
Add: Changjiang North Road,
Tianyuan District, Zhuzhou, Hunan, China

Wire drawing dies

    • Wire drawing dies

      Wire drawing dies

    • Wire drawing dies

      Wire drawing dies

    • Wire drawing dies

      Wire drawing dies

    • Wire drawing dies

      Wire drawing dies

    • Wire drawing dies

      Wire drawing dies

    • Wire drawing dies

      Wire drawing dies

    • Wire drawing dies

      Wire drawing dies

    • Wire drawing dies

      Wire drawing dies

    Grades of wire drawing dies


    Grade Density
    (g/cm3)
    Hardness
    (HRA)
    TRS 
    (N/mm2)
    ISO Code   Application recommended
    YG6X 14.95 91.5 1600 K10

    Fine grain size, with excellent wear resistance, suitable for drawing small size of steel and nonferrous wires and bars

    YG6 14.9 90.0 2400 K20 Medium grain size, with good wear resistance and strength, suitable for making medium and small sized drawing dies and wood working strips
    YG8 14.7 89.0 2800 K20 Medium grain size, with extensively applicable wear resistance and strength, suitable for making various size of drawing dies and wood working strips
    YG11 14.45 88.5 2850 K30 Medium grain size, with good impact resistance and strength, suitable for making medium and large sized drawing dies
    YG15 14.1 87.0 3100 K40 Medium grain size, suitable for making steel pipes and rods under strong stress and big compressibility. Also suitable for making punching dies under large impact load


      
    Size and Tolerance:
      Round die
      [ID]Size
    ID SIZE(mm) Tolerance ID SIZE(mm) Tolerance
    0.3~0.4 +0/-0.08 >16.0~24.0 +0/-0.5
    ≥0.4~0.6 +0/-0.08 >24.0~32.0 +0/-0.6
    >0.6~3.0 +0/-0.18 >32.0~40.0 +0/-0.8
    >3.0~6.0 +0/-0.25 >40.0~55.0 +0/-1.2
    >6.0~9.0 +0/-0.3 >55.0~90.0 +0/-1.5
    >9.0~16.0 +0/-0.4 >90.0 0/-2.0
      [OD]Size
    OD SIZE(mm)

    Tolerance

    ID SIZE(mm) Tolerance
    ≤10 +/-0.15 >35~40 +/-0.4
    >10~16 +/-0.2 >40~45 +/-0.5
    >16~30 +/-0.3 >45~50 +/-0.6
    >30~35 +/-0.4 >50 +/-1.3%D
      [H]Size
     SIZE(mm) Tolerance ID SIZE(mm) Tolerance
    ≤10 +/-0.2 >30~40 +/-0.5
    >10~16 +/-0.3 >40~50 +/-0.6
    >16~30 +/-0.4 >50~60 +/-0.8


      Polygonal die
      [ID]Size
    ID SIZE(mm) Tolerance ID SIZE(mm) Tolerance
    ≤2.0 +0/-0.25 >20.0~25.0 +0/-0.85
    >2.0~4.0 +0/-0.35 >25.0~32.0 +0/-0.90
    >4.0~6.0 +0/-0.4 >32.0~40.0 +0/-1.1
    >6.0~12.0 +0/-0.5 >40.0~50.0 +0/-1.5
    >12.0~16.0 +0/-0.65 >50.0~60.0 +0/-1.8
          >16.0~20.0 +0/-0.75 >60.0~75.0 0/-2.0
      [OD]Size
    OD SIZE(mm) Tolerance ID SIZE(mm) Tolerance
    ≤30 +/-0.5 >50~60 +/-1.0
    >30~40 +/-0.7 >60~80 +/-1.2
    >40~50 +/-0.8 >80~120 +/-1.5
      [H]Size
     SIZE(mm) Tolerance ID SIZE(mm) Tolerance
    ≤20 +/-0.4 >40~50 +/-0.8
    >20~30 +/-0.5 >50~60 +/-1.0
    >30~40 +/-0.6 —— ——
      Type 01
      Carbide drawing dies for wires
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H Range of d h
      01- 6 4 0.2-0.8 0.8
    8 6 1.0 1.0
    All dimensions in (mm)
      Type 10
      Carbide drawing dies for wires
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H Range of d h
      10- 6 4 0.4-0.8 0.8-1.2
    8 6 0.2-0.8 1.0-1.5
    All dimensions in (mm)
      Type 11
      Carbide drawing dies for wires
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H Range of d h α°
      11- 8 6 0.26-1.0 0.3-0.6 10°
    13 10 0.4-2.3 0.3-1.4 10°
    16 14 0.4-3.5 0.3-1.4 12°
    22 18 1.8-4.7 1.2-2.4 14°
    22 20 5.2-5.7 2.6-2.8 14°
      Type S11
      Carbide drawing dies with large reducing angles for wires
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H Range of d h α°
      S11- 8 6 0.3-1.0 0.3-0.6 14°
    10 8 0.7 0.6 14°
    13 10 0.4-2.8 0.3-1.6 16°
    15 13 0.5-3.0 0.3-1.4 16°
    16 14 0.4-3.8 0.3-1.8 16°
    20 17 1.2-4.7 2.0-2.6 18°
    21 17 1.8-5.7 1.2-3.0 18°
    22 18 1.7-6.4 1.2-3.0 18°
    All dimensions in (mm)
      Type 12
      Carbide drawing dies for wires and rods
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type >D H Range of d h
      12- >8 6 0.4-0.8 0.3-0.6
    >13 8 0.4-2.3 0.3-1.0
    >16 10 0.8-3.0 0.5-1.2
    >20 12 1.0-5.0 1.0-1.4
    >22 14 4.2-5.7 1.6-2.0
    >26 16 6.4-8.0 2.0
    >28 14 2.6-4.6 1.3-2.5
      Type 13
      Carbide drawing dies for rods
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H d h α°
      13- 30 21 3.7-9.6 1.5-4   14°
    40 24 9.0 6
    40 25 10.5-15.5 5
    50 28 16.5-24.5 5.5-6
    60 35 25.5-34.5 7-7.5   18°
    75 35 35.5-43.5 8
    90 35 45-57 9   20°
    110 40 59-69 10-11
    140 50 71-81.5 12
      Type S13
      Carbide drawing dies with large reducing angles for rods
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs

    Type D H d h α°
      S13- 25 18 5.8 2.5   20°
    28 19 6.0-10.9 3-5
    27 18 4.7-6.7 2.5
    28 20 3.7-9.6 2.5
    30 21 2.8-12.0 2.5-3.5
    35 24 9.6-12.0 5
    28 24 9.6-15.5 5
    40 25 9.0-15.5 5
    40 28 10.3 6
    50 28 16.5-24.5 5.5-6
    60 35 25.5-34.5 7
    75 35 35.5-47.5 8
    90 35 45-57 9-10   22°
    110 40 59-69 10-11
    140 50 71-84 12
    All dimensions in (mm)
      Type 21
      Carbide drawing dies for tubes
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs

    Type D H Range of d h
      21- 50 35 20.0-24.0   17
    60 45 26.0-30.0
    70 45 32.0-40.0   20
    80 45 42.0-46.0
    90 45 48.0-54.0
    100 45 58.0-62.0
    All dimensions in (mm)
      Type 22
      Carbide drawing dies for tubes
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H d h
    22- 20 13 2.8-5.7 1.5
    30 18 6.7-13.5 2-4
    35 18 14.5-17.5 4
    45 24 12.5-23.5 3
    50 25 24.5-30.5 5-6
    60 30 24.5-33.5 3.5
    65 32 34.5-39.5 6
    70 35 34.5-35.5 6.5
    75 35 40.5-42.5 6.5
    85 40 47.5 6.5
    80 35 34.5-47 6.5
    90 40 46-53   6.5
    100 40 55-57
    120 45 59-67.0
    130 50 69-77
    140 50 79-88
    All dimensions in (mm)
      Type 23
      Carbide drawing dies for tubes
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H Range of d h
      23- 50 32 20.0-24.0   12
    60 35 26.0-30.0
    70 42 32.0-36.0   15
    75 42 38.0-40.0
    85 45 42.0-46.0
    100 50 48.0-54.0   18
    110 50 56.0-62.0
    125 55 64.0-70.0 20
      Type 30
      Carbide floating plugs for tubes
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type d H D e
      30- 4 10 11 1
    6 12 13, 15 1
    8 12 17 1
    10 14 19.5, 21.5 1
    12 16 23.5 1
    14 16 25.5, 27.5 1-2
    17 27 28-37 2
    19 27 38.2, 39.4 2
    21 27 40-43 3
    23 32 44-46 3-4
    25 32 47-53 4
    27 32 54-57 4
    28 35 58-64 4
    All dimensions in (mm)
      Type 31
      Carbide floating plugs for tubes
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type d H Range of D
    31- 7 25 14.0-16.0
    8 25 17.0-18.0
    10 30 19.0-22.0
    12 30 23.0-27.0
    16 35 28.0-32.0
    20 35 33.0-42.0
    22 40 43.0-44.0
    26.4 45 45.0-47.0
    All dimensions in (mm)
      Type V   Carbide drawing dies for wires
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H d h α°
      V- 15 13 0.6-3.6 3-5.5 12°
    19 17 1.8-6.5 6-7   14°
    25 20 5.7-7.7 7-8
    35 21 8.2-11.5 8-10.5
    All dimensions in (mm)
      Type 40
      Carbide drawing dies for square bars
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H Range of A h α°
      40- 16 12 1.8-2.4 1   14°
    22 18 2.8-4.0 1.5
    30 21 4.6-4.7 2
    25 25 7.7-9.7 3
    45 25 10.7-14.7 3.5
    50 28 15.7-18.7 4
    60 30 19.7-23.7 5   16°
    65 32 24.7-27.5 6
    70 35 28.5-31.5   8   20°
    80 35 32.5-37.5
    90 40 38.5-41.5
    100 40 42.5-47.5
    120 45 49.5-53.5
      Type 41
      Carbide drawing dies for rectangular bars
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H a b H
      41- 30 21 6.7 4.7 2
    35 25 7.7-9.7 5.7-7.7 3
    45 25 11.7 5.7-9.7 3.5
    50 28 13.7-17.6 6.7-15.7 4
    60 30 19.2-23.6 7.7-14.7 5
      Type 42
      Carbide drawing dies for strips
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H a b h
      42- 20 12 1.9-3.1 0.6-1.9 2
    25 15 3.9-6.2 1.0-3.9 2.5
    35 18 7.2-11.4 1.1-6.3 2.5
    45 20 12.8-14.6 1.4-5.9 3
    50 20 16.5-23.2 1.9-6.3 3
    60 20 24.5-31.0 1.0-3.8 3
    All dimensions in (mm)
      Type 60
      Carbide drawing dies for hexagonal ferrous metal bars
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H Range of S h α°
      60- 30 21 2.5-7.7 1.5-2   14°
    35 21 8.6-10.6 3
    40 25 11.5-12.5 3.5
    45 25 13.5-18.5 4
    55 28 19.5-23.5 5
    65 30 24.5-28.5 6   16°
    75 35 29.5-37.3 7
    90 35 38.0-49.0 7
    100 40 52.0-57.5 8
    120 42 59.5-74.5 8
    All dimensions in (mm)
      Type R-2
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H d h α°
    R-2-d 8.5 8.64 0.51-2.54 1.93-4.39 12
      Type R4   Carbide drawing dies for wires
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H d h α°
    R4-d-12 12.7 11.4 1.0-4.6 0.5-1.6 12
    R4-d-16 12.7 11.4 0.3-4.6 0.5-1.8 16
      Type R-5  Carbide drawing dies for wires
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H d h α°
    R-5-d 16.1 15.5 0.76-6.86 3.05-9.3 12
    0.76-3.56 3.05-6.9 16
      Type R-6
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H d h α°
      R-6-d 18.3 18.1 2.03-9.14 5.08-13.9 16
    18.0 17.7 1.3-6.3 1.0-2.0 12
      Type R-7
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H d h
    R-7-d 19.8 19.5 6.35-10.67 1.9-3.2
      Type R-8(9,10)
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H d h
    R-8-d 25.6 21 6.10-12.7 1.83-3.81
    R-9-d 30.4 21 10.16-16.51 3.05-4.95
    R-10-d 38.4 26 12.7-21.59 3.81-6.48
    All dimensions in (mm)
      Type W
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H d h α°
    W102-d 9 6 0.4-1.3 0.4-0.7 12°
    W103-d 12 8 0.2-2.7 0.5-1.4 14°
    W104-d 15 10 0.5-5.0 0.5-2.0 14°
    W105-d 20 14 1.0-7.5 0.8-2.0 14°-16°
    W106-d 25 18 5.3-8.0 1.9-2.2 16°
    W107-d 30 22 2.9-11.7 2.2-3.6 16°
    W108-d 35 25 6.0-16.0 2.5-4.8 16°
    W109-d 40 27 10.3-16.5 3.2-4.6 18°
    W110-d 50 30 14.4-19.4 4.4-4.8 18°
    W111-d 60 35 18.5-27 4.8-5.6 18°
    W112-d 70 40 24.5-31.5 5.4-6.0 18°
      Type W (β)
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type D H d h
    W107-d-Dβ 30 23 7.5 3.2
    W108-d-Dβ 35 26 10.0 3.8
    W109-d-Dβ 40 28 12.3 5
    W110-d-Dβ 50 30 15.3 5.4
    W111-d-Dβ 60 36 21 6
    All dimensions in (mm)
      Type A : Carbide drawing dies for wires     
      Type B :  Carbide drawing dies for wires
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
    Type d02 h02 d04 d05 2β±2° 2γ±4°
    A08-00 8 4 4.2 2.2   90°   90°
    A10-00 10 8 7.6 4.2
    B08-00 8 4 4.2 2.2
    B10-00 10 8 7.6 4.2
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
      Type   d02   h02 Range of d01 Range of d04 Range of d05   2β±2°   2γ±4°
    A08- 8 4 0.4-0.6 3.6 2.2   90°   90°
    A10- 10 8 0.4-1.5 6.0 3.5-4.5
    A12- 12 10 0.4-1.8 7.0-8.0 4.5-5.5   60°   75°
    A14- 14 12 0.4-2.4 7.0-8.0 5.0-6.0
    A16- 16 13 0.4-3.0 8.0-9.5 5.0-7.0
    A20- 20 17 1.0-3.1 8.5-9.5 6.0-8.0   60°
    A25- 25 20 2.0-3.4 11.5-13.0 7.0-8.0
    A30- 30 24 3.0-3.7 15.0-16.0 9.0
    B08- 8 4 0.4-0.6 3.6 2.2   90°   90°
    B10- 10 8 0.4-1.5 6.0 3.5-4.5
    B12- 12 10 0.4-1.8 7.0-8.0 4.5-5.5   60°   70°
    B14- 14 12 0.4-2.4 7.0-8.0 5.0-6.0
    B16- 16 13 0.4-3.0 8.0-9.5 5.0-7.0
    B20- 20 17 1.0-3.1 8.5-11.0 6.0-8.0   60°
    B25- 25 20 2.0-3.4 11.5-13.0 7.0-8.0
    B30- 30 24 3.0-3.7 15.0-16.0 9.0
    Zhuzhou ourek hard alloy co. LTD_Carbide Cutting tools|Carbide end mills|Carbide rotary burrs
      Type   d02   h02 Range of d01 Range of d04 Range of d05   2α±1°   2β±2°   2γ±4°
    A20- 20 17 4.0-4.6 12.0-12.5 8.5-9.0   16°   60°   60°
    A25- 25 20 4.1-6.5 13.5-15.5 8.5-11.0
    A30- 30 24 4.5-9.0 17.0-20.0 10.0-16.0
    B20- 20 17 4.0-4.6 12.0-12.5 8.5-9.0   16°   60°   60°
    B25- 25 20 4.1-6.5 13.5-15.5 8.5-11.0
    B30- 30 24 4.5-9.0 17.0-20.0 10.0-16.0
    All dimensions in (mm)
    • Hotline
    • +86-731-22588826
    • Mobile website